Blackjack Gaming Table

A blackjack table is a gaming table built around one betting box per player position, with a dealer station at the apex, a chip tray, a shoe position and a discard tray. Macaumr produces these tables in half-round and seven-sided shapes, in standard or RFID builds, sized to the room rather than to a fixed model list.

How big is a blackjack table?

The range runs from 2,200 mm wide by 1,100 mm deep and 780 mm high to 2,300 mm by 1,350 mm and 960 mm high, depending on the shape and the base. The height difference is the base, not the playing surface: a table on a floor pedestal stands lower than one on a high leg or a stepped footrest.

Size and position count move together. Adding a position means a longer or deeper surface, so that players are not crowded and the dealer can reach every box from a standing position. A seven-sided shape and a half-round shape of the same width do not hold the same number of players, because the usable arc of the felt differs. That is why dimensions are quoted with the position count rather than on their own.

How many betting boxes does a blackjack table need?

It is set by the table size and the felt layout, not by the model. A room that needs more positions uses a longer or deeper table, and the boxes are then laid out on the felt to match. Nothing in the build caps the number at a fixed figure — the constraint is the room, the game rules in use, and the space the dealer needs behind the table.

Two details decide how the table feels in service. The first is the spacing between adjacent boxes, which controls how comfortably a player can manage a split hand and side bets. The second is the dealer’s working arc, which has to cover the shoe, the chip tray and the discard tray without the dealer turning away. Both are settled at the specification stage, from the room plan and the felt drawing.

Standard or RFID-enabled blackjack table?

Blackjack generates constant chip activity: several boxes live at once, side bets, and split or double-down hands running in parallel. On a tracked table the chip layer is read at the betting zone rather than the hand, so chips added to a box during a split are captured as movement in that box. Key betting zones are read by two antennae that cross-check each other, and a reading point that fails is reported by name rather than passing as a silent gap.

Where the cage already reconciles chips and limits are modest, a standard build is the more economical choice. See the RFID casino table solutions page for the tracking side of the project.

What sits on a blackjack table?

The parts around the felt matter as much as the felt itself:

• Betting boxes printed on the layout, one per player position, with the insurance line and any side-bet areas.
• Dealer station at the apex of the arc, with enough depth for the shoe, the discard tray and a working area between them.
• Chip tray in front of the dealer, laid out by denomination to match the fill and credit routine used in the room.
• Shoe position, planned together with the discard tray so that dealing and collection do not cross paths.
• Armrests and cup holders on the player side, included or omitted per property.
• Base and footrest, which also change the overall height — the high-leg and stepped bases in this range stand 960 mm high against 780 mm on the low pedestal.

Which blackjack game table model fits your room?

Six models cover the range. They differ in shape, base and finish; the felt, the position count and the dimensions are configured per project on any of them.

The choice usually comes down to two things. The seven-sided model gives a wider arc for the same footprint, which suits rooms that want more player positions in a compact space. The half-round models read as a traditional baccarat-pit look and take a footrest, which matters where players stand at the table for long sessions. The RFID model is the lower, pedestal build — the one to specify when the table also has to feed a tracking system.

What is customized on a Macaumr blackjack table?

• Table size and position count. Length, depth and the number of betting boxes, matched to the room and the game rules.
• Shape and base. Half-round or seven-sided, on a high leg, a stepped footrest or a floor pedestal.
• Felt and layout. Colour, material and print, including side-bet artwork, payout information and house rules. Martindale abrasion test data is available for the felt, and repeat orders are matched to a colour difference of ΔE ≤ 2.
• Chip tray and discard tray. Tray layout and placement set around the dealer’s working arc.
• Shoe configuration. An electronic card shoe or a manual shoe, with the position planned at the same time as the discard tray.
• Finish and branding. Wood finish, trim and property branding, including OEM production. Wood veneer is fire-retardant treated, and test reports are available for the destination market.

How does a blackjack table fit with the rest of the pit?

Blackjack is usually part of a mixed pit. The printed surface comes from the blackjack table layout range, seating is specified from the blackjack chair range so table height and seating match, and the room may also include Baccarat tables, roulette tables and poker tables from the wider casino gaming table collection.

Table height is the detail that catches people out. A 780 mm pedestal table and a 960 mm stepped table need different chair heights, and the two do not sit comfortably side by side in one pit unless the seating is planned with them. The same applies to the clearance behind the dealer: a stepped table takes up more floor depth than a pedestal one, which changes how tightly the tables can be set.

Specifying the pit together keeps finishes, felt colours and heights consistent, and it avoids the tolerance differences that appear when tables, layouts and seating arrive from different suppliers. The professional blackjack table specifications guide covers the construction details operators usually ask about.

How do you order blackjack tables from Macaumr?

Send the room plan with the number of tables, the position count you need and any tracking or shoe preference. Macaumr confirms the build, the felt and layout artwork scope and the dealer-side configuration, then issues a quotation with the lead time and shipping terms.

The indicative minimum is 1–10 sets, depending on the felt artwork, the configuration and the number of tables; the exact quantity is confirmed in the quotation. Indicative production time is 15–45 working days after the specification and artwork are approved. Reference samples are available for a non-refundable sample fee, and fully custom designs are approved from an artwork mock-up before production.

Tables ship in export packing, wooden case or carton, confirmed at order, under HS code 9504904000, with a 12-month warranty. They are delivered as a complete table and assembled on site; the installation method is confirmed with the quotation for the destination.

Macaumr has manufactured casino equipment in Panyu, Guangzhou since 2013 and supplies operators, distributors and system integrators across Europe, America, Russia, Japan and South Korea, Southeast Asia, Central Asia, Africa and the Middle East (About Macaumr). Reach the team on WhatsApp at +853 63403801, on Telegram at https://t.me/lym52 or by email at [email protected], or start from the contact page.

Frequently asked questions about blackjack tables

How many player positions and betting boxes fit on a table?

As many as the shape and the felt drawing allow. A seven-sided shape holds a different number from a half-round shape of the same width, because the usable arc differs, so the count is confirmed from the drawing rather than quoted as a fixed number.

Should the table be standard or RFID-enabled?

Choose tracking where chip movement has to be logged as it happens, where large hands create dispute exposure, or where regulators expect table-level records. Choose the standard build where the cage already reconciles chips and limits are modest. Part of a floor can be converted first.

How does RFID handle split and double-down hands?

The readers follow chip identity inside the betting zone rather than the card hand, so chips added to a box mid-hand are logged as movement in that box. What the software does with an exception — a missing read, a mismatch — is a procedural setting agreed with your casino management system, not something the table decides.

Can the shoe and discard tray be positioned?

Yes. Both are placed against the dealer’s working arc and the chip tray layout, and the position is planned around the dealing procedure used in the room. Electronic and manual shoes are both available, and the choice changes the depth the dealer station needs.

What felt and layout options are available?

Colour, material, print method, box layout, side-bet artwork, payout information and branding are specified per property. Print method matters as much as colour: heat-transfer and screen print behave differently under heavy chip wear, and fully custom layouts are approved from a mock-up before production.

How long does production take?

Indicatively 15–45 working days after the specification and artwork are approved. The number of tables, the artwork scope, the dealer-side configuration and whether tracking hardware is included all move the schedule, so the quotation states the date for the order rather than a general figure.

Can tables be combined with other games in one order?

Yes. Blackjack, Baccarat, roulette tables, layouts and seating can be specified in one project, which keeps finishes and heights consistent across the pit and gives one production schedule and one shipment.

How do I request a quote?

Send the room plan, the number of tables, the position count and any tracking or shoe preference. The quotation then confirms the build, the artwork scope, the lead time and the shipping terms. Contact details are on the contact page linked above.